thea121 - 1/10/13 - PART2
  1. always check a light before hanging it
  2. always make sure it has a safety clamp
  3. finger tight the c clamp
  4. tighten with wrench, does not have to be impossibly tight, just enough to hold it firmly
  5. DO NOT DISCONNECT THE YOKE FROM THE C-CLAMP (top of yoke)
  6. nut on side of c clamp to rotate
  7. handle on side of light of casing to rotate
  8. always tighten nuts and twisties again
  9. focus light

FRESNEL

  • C clamp - the clamp
  • yoke - the handle/arch
  • housing/barrel/casing
  • lens
  • safety clamp - cord
  • basic u-ground plug
  • ridge to house gels
  • gels
  • gel holder (CARDBOARD GOOD, but can catch fire)
  • pin to open housing
  • light bulb inside
  • reflector inside
  • pin to move reflector and bulb
  • can use barn door shutters

LEKO

  • C clamp - the clamp
  • yoke - the handle/arch
  • housing/barrel/casing
  • lens
  • safety clamp - cord
  • basic u-ground plug
  • ridge to house gels
  • gels
  • gel holder (CARDBOARD GOOD, but can catch fire)
  • some lekos have elbows
  • barrel can extend 
  • shutters
  • shutter handles
  • gobo holder
  • gobo
  • light bulb inside end
  • reflector inside end
  • pin to open housing
  • pin to hold lightbulb in place

BABY LEKOS

  • baby lekos C:
  • 3.5’’ as opposed to 6’’

ALWAYS REMEMBER WHEN HANGING:

  • nothing in your pockets
  • wrench on a wrist loop
  • if it’s you or the light that falls, let the light go